Wood windows can be beautiful, especially when used in older homes. However, vinyl replacement home windows are much more energy efficient and modern vinyl windows can be made to simulate the appearance of wood. Due to both economical and environmental concerns, vinyl windows are a much better choice. It can be a chore to replace old windows with vinyl if you try to do it yourself.
First, you have to remove the old window trim. Start by cutting away any caulk from the trim, and then pry up the trim with a pry bar. Continue to remove all the caulking from the window as you go. You can use a putty or paint knife to scrape away the caulking and clean up the window area.
For the next step in installing replacement home windows for wood windows, you must take the wood frame out of the window space. You can do this with a cordless screw gun and the appropriate tip. Screw out the fasteners carefully while having another person help hold the window up for you. It may be difficult to get some screws started, but be patient. Remember that they have probably been in the window frame a long time. If you have too much trouble getting them out, you might end up turning to a home remodeling company to complete the job for you. It is always a good idea to make this decision sooner rather than later. http://smartwebsiteideas.com/
When you have completely taken out all the screws or fasteners holding in the window frame, the wooden frame should slide loose from the window opening with no problem. Once you and your helper remove the window with its frame from the opening, you can scrape away all the caulk or sealant that is left. Then, you can fill in any gouges or holes in the wood with wood putty, let it dry, and sand it smooth. The window space is now ready for you to begin putting in the replacement home windows.
You run a bead of caulk in the window opening, and then you can place your replacement home windows into the spaces you have made there. You should check the window all the way around to make sure it is level and plumb. Shim it is you have to in order to make it sit squarely in place.
Before you go any further, try the window out. By this point in the installation, the replacement home windows should already work the way they are supposed to work after completely installed. If they are slide-out windows, they should slide out smoothly. If they are supposed to slide up and down, then they should do that easily as well. If there is a hitch in the operation, troubleshoot the problem at this point and fix it before you complete installation of the window.
The final step to installing the replacement home windows themselves is to put in the fasteners that are included or recommended to be used by the manufacturer. You will have to read the instructions that come with the windows to make sure you are doing it correctly. If you use a home remodeling company, they will take all the worry out of this process and put the windows into place securely for you. After all the trim has been placed around the outside of the replacement home windows, the windows will be ready to earn their keep by saving you money on energy bills every day.